Documentation How to embed video

EDIT ADDITIONAL INFORMATION IN PRODUCTS

Documentation How to embed video

CHORD SIGNATURE TUNED ARAY STEREO RCA INTERCONNECT

Chord Signature Tuned ARAY tone arm cable

Chord SignatureXL speaker cable

Control4 Wireless Lighting Control

In Detail
The high-quality components in the CDi mean that the sound it produces can make your spine tingle. A wide and full soundstage will fill a room of any size with sound, and you will hear details in your music which your old system never even picked up on!
The CDi uses many of the same components as the <a href="http://www.martinshifi.co.uk/product/2182/cyrus-cd-xt-signature/" target="_blank" rel="noopener noreferrer">CD Xt Signature</a>, including a latest generation LED disc loader. This use of top end components for lower specification models spreads throughout the Cyrus range, meaning that products like the CDi comfortably outperform their peers in the same price range.
A 32 bit DAC gives the CDi all of the capacity it needs to convert even the most complex loads into full analogue output.
To further improve your sound, connect our <a href="http://www.martinshifi.co.uk/product/1598/cyrus-psxr/" target="_blank" rel="noopener noreferrer">PSX-R</a> external power supplytodecrease the strain on the internal power supply of the unit. Connect the CDi to an amplifier like the <a href="http://www.martinshifi.co.uk/product/2038/cyrus-8a/" target="_blank" rel="noopener noreferrer">Cyrus 8a</a> for a fantastic sound, and complete your system by connecting a <a href="http://www.martinshifi.co.uk/product/2173/cyrus-stream-xa/" target="_blank" rel="noopener noreferrer">Stream Xa</a> to add streaming capabilities.

For unique tab:

+ Add unique tab for product page

Cyrus CDi-XR

Cyrus CDt

For unique tab:

The CD t is an audiophile CD transport widely seen as the best CD transport in its class because it uses many of the top end components put into our flagship CD Xt Signature. As well as our unique Servo Evolution disc reading engine, the CD t houses many components usually reserved for players costing a great deal more. A multi-regulated power supply allows the Servo Evolution software to work with miniscule precision, pulling huge amounts of data from your disc and transporting that to a separate DAC without adding or taking away anything from the music itself. A complex re-clocking circuit with close tolerance crystal VCO is used, resulting in sound that is pure and full. In tests, it produces industry-leading read error rates, which is why the CD t is often named the best CD transport in its price range. Partner this fantastic CD transport with the 82DAC integrated amplifier and digital-to-analogue converter or the Pre₂ DAC.
<div class="col-md-6 colsm-12 col-xs-12 phil-text no-padding"></div>

For unique tab:

+ Add unique tab for product page

Cyrus CDt XR

Cyrus Classic AMP

Cyrus Classic Phono

Cyrus Classic Power

Cyrus Classic Pre

Cyrus Classic Stream

Cyrus i9 XR

For unique tab:

+ Add unique tab for product page

Cyrus ONE Cast

For unique tab:

INPUTS Google Assistant enabled, Amazon™ Alexa enabled and Apple® AirPlay 2 enabled Asynchronous USB input (up to 32bit 192khz and DSD to DSD128), HDMI (ARC), Optical Toslink, Coaxial SPDIF Bluetooth™ Audio RCA input to built-in MM phono stage for turntables. Analogue input configurable for AV integration AMPLIFIER DESIGN Cyrus 4th generation Hybrid Class D amplifier – outputs 2 x 100W (into 6 Ω at 0.1% THD+N) SID – Speaker Impedance Detection (automatically calibrates amplifier to your speakers) Pre outputs – connect to additional power amplifiers High power, high voltage class AB headphone amplifier FEATURES Over the air firmware update – Latest software downloads and installs automatically. Linear power supply IR remote control Lockable front panel controls WI-FI CONNECTIVITY 802.11a/b/g/n/ac WEP, WPA, WPA2 security DIMENSIONS (H X W X D) – 85 x 220 x 390mm Weight – 5.6kg

For unique tab:

+ Add unique tab for product page

Cyrus Phono Signature

Cyrus Power XR

Cyrus Pre 2 Dac QXR USED

Cyrus Pre-XR

For unique tab:

+ Add unique tab for product page

Cyrus PSU XR

Cyrus PSX-R2

Cyrus Stereo 200

For unique tab:

+ Add unique tab for product page

Cyrus Stereo 200 Ex-Demo

For unique tab:

+ Add unique tab for product page

Cyrus Stream Offer

Cyrus Stream XR

Cyrus TTP Turntable

Cyrus X Power

For unique tab:

+ Add unique tab for product page

DA Lite Projector Screens

dCS Bartok APEX

dCS Bartok DAC / UPNP Renderer

dCS Lina

dCS Rossini upsampling DAC UPnP Renderer - Martins Hi-Fi

dCS Rossini Apex DAC

dCS Rossini Apex Player

For unique tab:

Designed for flexibility and ease of use without compromise, Rossini uses the very latest dCS Digital Processing Platform and Ring DACTM technology, originally developed for the flagship Vivaldi series. Its single FPGA brings improved signal processing and superior flexibility, effectively making it future-proof.
Rossini Player has a powerful new user interface, plus a custom control app that lets listeners manage their music playback from any source in an elegantly simple way – accessing CD playback, music streaming services, digital and UPnP sources from one control point. The Rossini app also features an intuitive install and configuration wizard for ease of set-up.
Featuring DXD upsampling as standard, the multi-stage oversampling design offers optional DSD upsampling plus an extensive selection of DSP filters to suit individual taste and music choice. The network streaming functionality within Rossini Player is unparalleled in its processing power and jitter performance, and currently runs at up to 24-bit, 384kS/s and DSD128, supporting all major lossless codecs, plus DSD in DoP format and native DSD.
The Rossini Player’s CD mechanism does not support SACD, but SACD data can be played via Dual AES output from dCS Vivaldi, Scarlatti or Paganini Transports.
Rossini supports the simple yet highly effective dCS ‘auto clocking’ architecture as used in Vivaldi, which minimises jitter and improves sound quality significantly.
Designed and made in Great Britain to the highest standards, Rossini’s elegant chassis uses aerospace-grade machined aluminium with internal acoustic damping panels to reduce sound-degrading mechanical vibration and magnetic effects. Multi-stage power regulation is employed, with twin mains transformers to isolate the analogue, digital and clock circuitry.
As with all dCS products, Rossini’s firmware can be easily updated via CD, USB or the new automated download and update facility. This lets dCS add new features and improve the performance of Rossini over its lifetime.
When listening to digital music through a Rossini system, listeners are immediately struck by its natural musicality and faithfulness to the original recording. It delivers a powerful and visceral sound yet is highly transparent too, making for an immersive and realistic listening experience.

For unique tab:

Technical Specifications
<ul data-mce-fragment="1">
<li data-mce-fragment="1">Type
Upsampling CD/Network Player.
</li>
<li data-mce-fragment="1">Colour
Silver or Black.
</li>
<li data-mce-fragment="1">Dimensions
444mm/17.5” x 435mm/17.2” x 151mm/6.0”. Allow extra depth for cable connectors.
</li>
<li data-mce-fragment="1">Weight
17.4kg/38.3lbs.
</li>
<li data-mce-fragment="1">Converter Type
dCS proprietary Ring DACTM topology. Operates at 6MHz (Map 1 or 3) or 3MHz (Map 2)
</li>
<li data-mce-fragment="1">Digital Inputs
Network interface on an RJ45 connector–Acts as a UPnPTM renderer in Asynchronous mode, streaming digital music from a NAS or local computer over a standard Ethernet network, decoding all major lossless formats including FLAC, WAV & AIFF at up to 24 bit 384kS/s native sample rate, plus DSD/64 & DSD/128 in DFF/DSF format. Other supported formats include WMA, ALAC, MP3, AAC & OGG. Some formats are limited to lower sample rates. Accepts data streamed from an iPod, iPhone or iPad via Apple AirPlay, 44.1 or 48kS/s only. Network Loop Out connector on a second RJ45 connector. USB 2.0 interface on a B-type connector operating in Asynchronous mode, will accept up to 24 bit PCM at up to 384kS/s plus DSD/64 & DSD/128 in DoP format. Operates in Class 1 or 2 mode. USB-on-the-go interface on type A connector operating in Asynchronous mode, streams digital music from a flash drive at up to 24 bit 384kS/s plus DSD/64 or DSD/128. 2x AES/EBU on 3-pin female XLR connectors. Each will accept PCM at up to 24 bit 192kS/s or DSD/64 in DoP format. Used as a Dual AES pair, it will accept PCM at up to 384kS/s, DSD/64 & DSD/128 in DoP format or dCS-encrypted DSD. 2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each will accept PCM at up to 24 bit 192kS/s or DSD/64 in DoP format. 1x SPDIF optical on a Toslink connector will accept PCM at up to 24 bit 96kS/s.
</li>
<li data-mce-fragment="1">Mechanism
Stream Unlimited JPL-2800 SilverStrike with aluminium tray.
</li>
<li data-mce-fragment="1">Analogue Outputs
Output levels: 0.2, 0.6, 2V or 6V rms for full-scale input, set in the menu. Balanced outputs: 1 stereo pair on 2x 3-pin XLR male connectors (pin 2 = hot, pin 3 = cold). These outputs are electronically balanced and floating. Output impedance is 3Ω, maximum load is 600Ω (10k-100kΩ is recommended). Unbalanced outputs: 1 stereo pair on 2x RCA phono connectors. Output impedance is 52Ω, maximum load is 600Ω (10k-100kΩ is recommended).
</li>
<li data-mce-fragment="1">Wordclock I/Oworldclock Io
2x Word Clock Inputs on 2x BNC connectors, accept standard word clock at 44.1, 48, 88.2, 96, 176.4 or 192kHz. The data rate can be the same as the clock rate or an exact multiple of the clock rate. Sensitive to TTL levels. Word Clock Output on 1x BNC connector. In Master mode, a TTL-compatible word clock appears on this output.
</li>
<li data-mce-fragment="1">MQA
Full decoding and rendering of MQA data from the Network and USB2 inputs. Final rendering of unfolded MQA data only from the other inputs.
</li>
<li data-mce-fragment="1">Residual Noise
16-bit data: Better than -96dB0, 20Hz-20kHz unweighted. 24-bit data: Better than -113dB0, 20Hz-20kHz unweighted. (6V output setting).
</li>
<li data-mce-fragment="1">L R Crosstalk
Better than -115dB0, 20Hz-20kHz.
</li>
<li data-mce-fragment="1">Spurious Responses
Better than -105dB0, 20Hz-20kHz.
</li>
<li data-mce-fragment="1">Filters
PCM mode: up to 6 filters give different trade-offs between the Nyquist image rejection and the phase response. DSD mode: 4 filters progressively reduce out-of-audio band noise level.
</li>
<li data-mce-fragment="1">Upsampling Rates
User Selectable PCM upsampling to DXD, DSD or DSDx2.
</li>
<li data-mce-fragment="1">Software Updates
Loaded directly CD-R or via PCM digital inputs or PC via USB input. Download and update functionality available via Mosaic App.
</li>
<li data-mce-fragment="1">Local Control
dCS Mosaic App for Unit Configuration and Music Playback. RS232 interface (controlled by a 3rd party automation system). IR remote control – dCS universal handset remote is supplied with Rossini Player.
</li>
<li data-mce-fragment="1">Power Supply
Factory set to either 100, 115/120, 220 or 230/240V AC, 50-60Hz.
</li>
<li data-mce-fragment="1">Power Consumption
26 Watts typical / 35 Watts maximum.
</li>
<li data-mce-fragment="1">Operating Systems
Windows Vista / 7 / 8.1 / 10, Mac OSX 10.10. dCS USB driver is required for Windows in Audio Class 2 Mode.
</li>
</ul>

+ Add unique tab for product page

dCS Rossini CD/SACD Transport

For unique tab:

dCS Rossini CD/SACD  Transport can be controlled via the custom Rossini control app, allowing listeners to manage their music playback from any source in an elegantly simple way – accessing CD or SACD playback, digital and UPnP sources all from one control point. The Rossini app also features an intuitive install and configuration wizard for ease of set-up.
Rossini Transport is intended to be used with the matching Rossini DAC or with any suitable industry standard DAC. The unit may be run in Master mode or by using the DAC as the system clock. Performance will be enhanced further by adding the Rossini Clock to the system. The Rossini range supports the simple yet highly effective dCS ‘auto clocking’ architecture as used in Vivaldi, which minimises jitter and improves sound quality significantly.
Designed and made in Great Britain to the highest standards, Rossini’s elegant chassis uses aerospace-grade machined aluminium with internal acoustic damping panels to reduce sound-degrading mechanical vibration and magnetic effects. Multi-stage power regulation is employed, with the mains transformer isolated from the analogue, digital and clock circuitry.
As with all dCS disc Transports, Rossini’s firmware can be easily updated via CD. This lets dCS add new features and improve the performance of Rossini over its lifetime.
When listening to digital music through a Rossini system, listeners are immediately struck by its natural musicality and faithfulness to the original recording. It delivers a powerful and visceral sound yet is highly transparent too, making for an immersive and realistic listening experience.

For unique tab:

<ul>
<li>Type
Upsampling CD/SACD Transport.
</li>
<li>Colour
Silver or Black.
</li>
<li>Mechanism
Dual laser CD/SACD mechanism.
</li>
<li>Dimensions
444mm (17.5”) long x 435mm (17.2”) deep x 178mm (7.0”) high. Allow extra depth for cable connectors. Allow space for air flow around the unit.
</li>
<li>Weight
20.6kg (45.3lbs).
</li>
<li>Digital Outputs
Dual AES interface on 2x 3-pin male XLR connectors (AES1+2). While an SACD is playing, the interface outputs encrypted DSD data. While a CD is playing, the Settings > Upsample Mode menu page sets the interface to output either encrypted DSD data (1 bit at 2.822MS/s) or DXD data (24 bits at 352.8kS/s) or DSDx2 data (1 bit at 5.644MS/s). AES interface on 3-pin male XLR connector (AES3), outputs 16/44.1 data, whether a CD or SACD is playing. 2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each outputs 16/44.1 data, whether a CD or SACD is playing.
</li>
<li>Wordclock I/Oworldclock Io
Word Clock Output on 1x BNC connector. With the transport in Master mode, a TTL-compatible 44.1kHz word clock derived from the internal crystal oscillator is available on this output. Word Clock Input on 1x BNC connector, accepts standard word clock at 44.1, 88.2 or 176.4kHz. Sensitive to TTL levels. Lock range is +/-300ppm.
</li>
<li>Clock Accuracy
The calibration accuracy when shipped is +/-10ppm, (not temperature compensated).
</li>
<li>Software Updates
Updates are loaded directly from CD-R.
</li>
<li>Local Control
dCS Premium Remote handset (not supplied with Rossini Transport as standard. Via the Rossini app, RS232 app or a third party device.
</li>
<li>Power Supply
Factory set to either 100, 115/120, 220 or 230/240V AC, 50/60Hz.
</li>
<li>Power Consumption
16W typical / 50W maximum. Consumes less than 0.5W when powered down from the front panel.
</li>
</ul>

+ Add unique tab for product page

dCS Rossini Master Clock

dCS Vivaldi Apex DAC

For unique tab:

<ul>
<li>Utilises the latest generation dCS Digital Processing Platform for state-of-the-art measured performance and unrivalled fidelity.</li>
<li>Designed for maximum flexibility by accepting audio data from a variety of digital sources.</li>
<li>Flexible output configuration can be optimised in systems with or without preamplifiers.</li>
<li>Comprehensive clocking architecture plus an auto-clocking mode used in the Vivaldi range improves ease-of-use and minimises jitter.</li>
<li>USB interface allows easy connection to a computer, accepting PCM data at up to 24/384 and DoP (DSD/64 or DSD/128 over PCM).</li>
<li>The interface runs in asynchronous USB mode, making the DAC immune to jitter from noisy computer master clocks.</li>
<li>Improved power supplies give lower running temperature and superior tolerance to AC supply variations.</li>
<li>Multi-stage regulation ensures sensitive analogue circuitry is unaffected by digital interference.</li>
<li>Separate power circuits for the digital and analogue sections further enhance the purity of the power supply.</li>
<li>Aerospace-grade machined aluminium chassis fitted with tuned acoustic damping panels reduces magnetic effects and vibration.</li>
<li>Features a full MQA™ decoder. This MQA™ implementation is unique, as it is the first opportunity to enable a DAC which, by providing exact rendering to beyond 16x (768 kHz), matches the desired temporal response with very low modulation noise.</li>
</ul>

For unique tab:

<ul>
<li class="attr_name">Finish Options</li>
<li>Silver or Black</li>
</ul>
<ul>
<li class="attr_name">Dimensions</li>
<li>
444mm/17.5" x 435mm/17.2" x 151mm/6.0" high.
Allow extra depth for cable connectors.
Allow space for air flow around the unit.
</li>
</ul>
<ul>
<li class="attr_name">Weight</li>
<li>16.2kg/35.65lbs</li>
</ul>
<ul>
<li class="attr_name">CD Mechanism</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Converter Type</li>
<li>dCS proprietary Ring DACTM topology.</li>
</ul>
<ul>
<li class="attr_name">Analogue Outputs</li>
<li>
Output Levels: 2V rms or 6V rms on all outputs for a full-scale input, set in the menu.
Balanced Outputs: 1 stereo pair on 2x 3-pin male XLR connectors (pin 2 = hot, pin 3 = cold)
These outputs are electronically balanced and floating, the signal balance ratio at 1kHz is better than 40dB, output impedance is 3Ω, maximum load is 600Ω (a 10kΩ-100kΩ load is recommended).
Unbalanced Outputs: 1 stereo pair on 2x RCA Phono connectors.
Output impedance is 52Ω, maximum load is 600Ω (a 10kΩ-100kΩ load is recommended).
</li>
</ul>
<ul>
<li class="attr_name">Digital I/O</li>
<li>
INPUTS
USB 2.0 interface on a type B connector. Operates in asynchronous mode, will accept streamed PCM data up to 24 bits at 44.1, 48, 88.2, 96, 176.4 & 192kS/s and DOP (DSD over PCM). Can operate in USB Audio Class 1 or Class 2 mode.
4x AES/EBU on 3-pin female XLR connectors. Each will accept up to 24 bit PCM at 32, 44.1, 48, 88.2, 96, 176.4 & 192kS/s & DOP OR 2x Dual AES pairs at 88.2, 96, 176.4, 192, 352.8 & 384kS/s or dCS-encrypted DSD & DOP.
3x SPDIF on 2x RCA Phono and 1x BNC connectors. Each will accept up to 24 bit PCM at 32, 44.1, 48, 88.2, 96, 176.4 & 192kS/s or DOP.
1x SPDIF optical on a Toslink connector, will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s.
1x SDIF-2 interface on 2x BNC connectors, will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 & 96kS/s or SDIF-2 DSD (auto-selected).
If the unit is not in Master mode, this interface requires a compatible Word Clock input, locked to the data rate.
</li>
</ul>
<ul>
<li class="attr_name">Word Clock I/O</li>
<li>
INPUT
3x Word Clock inputs on 3x BNC connector, accept standard Word Clock at 32, 44.1, 48, 88.2, 96, 176.4 or 192kHz. The data rate can be the same as the clock rate or an exact multiple (0.125x, 0.25x, 0.5x, 1x, 2x, 4x, 8x) of the clock rate. Sensitive to TTL levels.
 OUTPUT
Word Clock output on 1x BNC connector. In Master mode, a TTL-compatible 44.1kHz Word Clock is available.
</li>
</ul>
<ul>
<li class="attr_name">Clock Frequencies</li>
<li>44.1kHz in Master Mode. Calibrated within +/-10ppm, not temperature compensated.</li>
</ul>
<ul>
<li class="attr_name">Residual Noise</li>
<li>Better than -113dB0 @ 20Hz-20kHz unweighted (6V Setting).</li>
</ul>
<ul>
<li class="attr_name">Spurious Responses</li>
<li>Better than -115dB0, 20-20kHz.</li>
</ul>
<ul>
<li class="attr_name">Filters</li>
<li>Better than -105dB0 @ 20-20kHz.</li>
</ul>
<ul>
<li class="attr_name">Software Updates</li>
<li>Loaded from CD-R or via USB interface.</li>
</ul>
<ul>
<li class="attr_name">Software Version</li>
<li>1.0</li>
</ul>
<ul>
<li class="attr_name">Local Control</li>
<li>
dCS Premium Remote is supplied as standard.
RS232 (controlled by a third party device).
A dCS-programmed Nevo Q50 is available for the Vivaldi range as an optional extra.
</li>
</ul>
<ul>
<li class="attr_name">Power Supply</li>
<li>Factory set for 100, 115, 220 or 230V AC, 49-62Hz.</li>
</ul>
<ul>
<li class="attr_name">Power Consumption</li>
<li>23 Watts typical/30 Watts maximum.</li>
</ul>
"

For unique tab:

+ Add unique tab for product page

dCS Vivaldi CD/SACD Transport MK2

For unique tab:

<ul>
<li class="attr_name">Type</li>
<li>Upsampling CD/SACD Transport</li>
</ul>
<ul>
<li class="attr_name">Finish Options</li>
<li>Silver or Black</li>
</ul>
<ul>
<li class="attr_name">Dimensions</li>
<li>444mm/17.5” x 435mm/17.2” x 196mm/7.8”. Allow extra depth for cable connectors.</li>
</ul>
<ul>
<li class="attr_name">Weight</li>
<li>23.2kg/51.1lbs.</li>
</ul>
<ul>
<li class="attr_name">CD Mechanism</li>
<li>Dual laser CD/SACD mechanism (TEAC VRDS NEO™ VMK3).</li>
</ul>
<ul>
<li class="attr_name">Converter Type</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Analogue Outputs</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Digital I/O</li>
<li>
1x Dual AES interface on 2x 3-pin male XLR connectors, outputs dCS-encrypted DSD data, whether a CD or SACD is playing. A menu setting changes the format to DXD (24/352.8) when a CD is playing.
1x AES/EBU on 3-pin male XLR connector, outputs CD format data (16 bits at 44.1kS/s), whether a CD or SACD is playing.
2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each outputs CD format data, whether a CD or SACD is playing.
1x SDIF-2 interface on 2x BNC connectors, outputs CD format data, whether a CD or SACD is playing.
</li>
</ul>
<ul>
<li class="attr_name">Word Clock I/O</li>
<li>
Word Clock output on 1x BNC connector. With the Transport in Master mode, a TTL-compatible 44.1kHz Word Clock derived from the internal crystal oscillator is available on this output. The calibration accuracy when shipped is +/-10ppm, not temperature compensated.
Word Clock input on 1x BNC connector, accepts standard Word Clock at 44.1, 88.2 or 176.4kHz. Sensitive to TTL levels.
</li>
</ul>
<ul>
<li class="attr_name">Clock Frequencies</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Residual Noise</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Spurious Responses</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Filters</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Software Updates</li>
<li>Updates are loaded directly from CD-R.</li>
</ul>
<ul>
<li class="attr_name">Software Version</li>
<li>1.0</li>
</ul>
<ul>
<li class="attr_name">Local Control</li>
<li>
dCS Premium Remote handset is supplied with Vivaldi DAC.
RS232 (controlled by a third party device).
dCS-programmed Nevo Q50 Remote handset is available for the Vivaldi range as an optional extra.
</li>
</ul>
<ul>
<li class="attr_name">Power Supply</li>
<li>Factory set for 100, 115, 220 or 230V AC, 49-62Hz.</li>
</ul>
<ul>
<li class="attr_name">Power Consumption</li>
<li>28 Watts typical/40 Watts maximum.</li>
</ul>
"

+ Add unique tab for product page

dCS Vivaldi Master Clock

For unique tab:

<ul>
<li class="attr_name">Type</li>
<li>Class 1 Master Clock</li>
</ul>
<ul>
<li class="attr_name">Finish Options</li>
<li>Silver or Black</li>
</ul>
<ul>
<li class="attr_name">Dimensions</li>
<li>
444mm/17.5” x 435mm/17.2” x 126mm/5.0”.
Allow extra depth for cable connectors.
</li>
</ul>
<ul>
<li class="attr_name">Weight</li>
<li>13.6kg/29.9lbs.</li>
</ul>
<ul>
<li class="attr_name">CD Mechanism</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Converter Type</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Analogue Outputs</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Digital I/O</li>
<li>
REFERENCE INPUT
External Reference Input on 1x 75Ω BNC connector. Accepts either Word Clock or AC coupled signals at 1MHz, 5MHz & 10MHz. Lock range is +/-300ppm.
</li>
</ul>
<ul>
<li class="attr_name">Word Clock I/O</li>
<li>
Two groups of 4 independently buffered outputs on 75Ω BNC connectors. Each group may be set to a different clock frequency.
</li>
</ul>
<ul>
<li class="attr_name">Clock Frequencies</li>
<li>44.1, 48, 88.2, 96, 176.4 or 192kHz.</li>
</ul>
<ul>
<li class="attr_name">Residual Noise</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Spurious Responses</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Filters</li>
<li>N/A</li>
</ul>
<ul>
<li class="attr_name">Software Updates</li>
<li>Loaded by CD-R via Reference input</li>
</ul>
<ul>
<li class="attr_name">Software Version</li>
<li>1.0</li>
</ul>
<ul>
<li class="attr_name">Local Control</li>
<li>
dCS Premium Remote handset is supplied with Vivaldi DAC.
RS232 (controlled by a third party device).
A dCS-programmed Nevo Q50 is available for the Vivaldi range as an optional extra
</li>
</ul>
<ul>
<li class="attr_name">Power Supply</li>
<li>Factory set for 100, 115, 220 or 230V AC, 49-62Hz.</li>
</ul>
<ul>
<li class="attr_name">Power Consumption</li>
<li>10 Watts typical/12 Watts maximum.</li>
</ul>
"

For unique tab:

+ Add unique tab for product page

dCS Vivaldi Upsampler

For unique tab:

<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Type</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">Digital-to-Digital Converter.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Finish Options</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">Silver or Black</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Dimensions</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">444mm/17.5" x 435mm/17.2" x 125mm/5.0". Allow extra depth for cable connectors. Allow space for air flow around the unit.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Weight</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">14.2 kg/31.3lbs.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">CD Mechanism</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">N/A</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Converter Type</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">N/A</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Analogue Outputs</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">N/A</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Digital I/O</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">
INPUTS
Network interface on an RJ45 connector - Acts as UPnPTM renderer and streams digital music from a NAS or local computer over a standard Ethernet network, decoding all major lossless formats including FLAC, WAV, AIFF, WMA up to 24 bit 192kS/s native sample rate. Other supported file formats include ALAC, MP3, M4a, AAC and OGG. Note: Some formats are limited to lower sample rates.
USB 2.0 interface on a type B connector. Operates in Asynchronous USB mode, Audio Class 1 or Class 2. Class 2 mode will accept up to 24 bit PCM at 44.1, 48, 88.2, 96, 176.4 or 192kS/s and DSD in DOP format.
USB-on-the-go interface on A-type connector, streams audio files from a USB flash drive or iPod/iPhone. Will accept up to 24 bit PCM at 44.1, 48, 88.2, 96, 176.4 or 192kS/s.  Operates in asynchronous USB mode.
AES3 on a 3-pin female XLR connector.
4x SPDIF on 2x RCA Phono, 1x BNC connectors and 1x TosLink optical connector.
1x SDIF-2 PCM interface on 2x BNC connectors + Word Clock.
All electrical digital inputs will accept PCM data at up to 24 bit PCM at 32, 44.1, 48, 88.2, 96, 176.4 or 192kS/s.
The Toslink input and SDIF-2 interface are limited to a maximum of 96kS/s. 
OUTPUTS
2x AES3 on 3-pin female XLR connectors. Each outputs 24 bit PCM at 32, 44.1, 48, 88.2, 96kS/s, 176.4, or 192kS/s or DOP.
OR as a Dual AES pair at 88.2, 96, 176.4, 192, 352.8 or 384kS/s or dCS-encrypted DSD or DOP.
2x SPDIF on RCA Phono and BNC connectors. Each outputs 24 bit PCM at 32, 44.1, 48, 88.2, 96, 176.4 or 192kS/s or DOP.
</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Word Clock I/O</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">
Word Clock input on 2x BNC connector. Accepts standard Word Clock at 32, 44.1, 48, 88.2, 96, 176.4 or 192kHz. Sensitive to TTL levels.
Word Clock output on 1x BNC connector. Outputs standard Word Clock at a frequency equal to the single wire) output data rate, or 44.1kHz when set to output DSD.
</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Clock Frequencies</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">N/A</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Residual Noise</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">N/A</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Spurious Responses</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">Better than -100dB0 @ 20Hz-20kHz for Fs> 32kS/s, 20Hz-14kHz for 32kS/s.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Filters</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">A choice of filter responses give different trade offs between Nyquist image rejection and the phase response.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Software Updates</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">Loaded from CD-R via PCM audio input or via USB.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Software Version</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">1.0</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Local Control</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">
dCS Premium Remote handset is supplied with Vivaldi DAC.
RS232 (controlled by a third party device).
dCS-programmed Nevo Q50 or the Premium Remote are available as an optional extra.
Vivaldi Controller App available for iOS, Android, Mac OSX & Windows.
</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Power Supply</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">Factory set for 100, 115, 220 or 230V AC, 49-62Hz.</li>
</ul>
<ul solid="" rgb="" none="" both="" ms="" arial="" sans-serif="" padding:="" border-width:="" border-bottom-style:="" border-bottom-color:="" list-style:="" clear:="" color:="" font-family:="" line-height:="" background-color:="">
<li class="\"attr_name\"" padding:="" border:="" display:="" block="" float:="" left="" width:="" text-transform:="" capitalize="">Power Consumption</li>
<li padding:="" border-width:="" border-left-style:="" solid="" border-left-color:="" gray="" display:="" block="" float:="" left="" width:="">15 Watts typical/18 Watts maximum.</li>
</ul>
"

+ Add unique tab for product page

EDIT ADDITIONAL INFORMATION IN PRODUCTS

SEARCH RESULTSClose

CHORD SIGNATURE TUNED ARAY STEREO RCA INTERCONNECT

Chord Signature Tuned ARAY tone arm cable

Chord SignatureX Power Cable

Chord SignatureXL speaker cable

Classe Delta MONO

Classe Delta PRE

Classe Delta PRE MK2

Classe Delta Stereo

Classe Delta Stereo Ex-Demo

ClearwayX ARAY analogue XLR

Control4

Control4 Smart Home Control

Control4 Wireless Lighting Control

Cyrus Bundles

Cyrus CDi

Cyrus CDi-XR

Cyrus CDt

Cyrus CDt XR

Cyrus Classic AMP

Cyrus Classic Phono

Cyrus Classic Power

Cyrus Classic Pre

Cyrus Classic Stream

Cyrus i9 XR

Cyrus ONE Cast

Cyrus Phono Signature

Cyrus Power XR

Cyrus Pre 2 Dac QXR USED

Cyrus Pre-XR

Cyrus PSU XR

Cyrus PSX-R2

Cyrus Stereo 200

Cyrus Stereo 200 Ex-Demo

Cyrus Stream Offer

Cyrus Stream XR

Cyrus TTP Turntable

Cyrus X Power

DA Lite Projector Screens

dCS Bartok APEX

dCS Bartok DAC / UPNP Renderer

dCS Lina

dCS Rossini Apex DAC

dCS Rossini Apex Player

dCS Rossini CD/SACD Transport

dCS Rossini Master Clock

dCS Vivaldi Apex DAC

dCS Vivaldi CD/SACD Transport MK2

dCS Vivaldi Master Clock

dCS Vivaldi Upsampler

Denon AVC-A1H